How to fix the U3 flash drive

U3 smart drives from SanDisk USB flash drive, preloaded run directly from the drive intelligence applications. With intelligent applications such as Firefox and Skype installed, the user can install and set up the application of these applications on a computer running Windows on no computer itself. According to SanDisk's website, you can U3 flash drive file system damage, or other disk error occurred. SanDisk Corporation provides repair U3 smart drive, an error message or not responding when plugged into the computer are two possible solutions.


Description
In the drive repair the file system will prompt an error message


1.Click on "My Computer" or "Computer" icon, start Windows Explorer on the desktop. On the drive letter of the U3 usb flash drive, right-click.


2.Select "Properties" from the resulting pop-up menu.


3.Click in the open, and then click the Properties window in the "Tools" tab "Check."


4.Check the box next to "Automatically fix file system errors" and "Scan for and attempt recovery of bad sectors" Check disk options listed under.


5.Click "Start" to repair the U3 smart drive's file system. Once the disk checking process is complete, check that the drive is working properly.

Repair the drive not responding

6.Please U3 mini usb flash drive to a different Windows computers. If you drive to work on your computer, please proceed to the next step. If the drive does not respond to other computers on, it fails, it should be returned to the place or purchase SanDisk.


7.By clicking "disable security" in the U3 Launchpad window and enter your password to confirm disable the U3 smart drive is password protected. This may allow access to the drive on the original computer.


8.U3 Launchpad software update. Click the "Status and Settings" in the Quick Start window, then select "U3 Launchpad Settings" and "Check for software updates." Allows the system to check for updates, and follow the prescribed steps to update the software, if updates are found.


9.By clicking on the system tray "U3" icon, then select the pop-up U3 smart drive "pop."


10.Drive into the original computer, and see if it's working.